Multicon dust arresters

Увеличить
1/1
Multicon dust arresters
 

Spec. TU 51-297-2010
Spec. TU 3647-037-00153229-2014

Our team is always available to provide more info,
please call

+7.4872.74.00.10

to learn more

 
  Multicon dust arresters
  Place your order

 

Multicon dust arresters are designed to filter gas from mechanical particles and condensate and provide filtering fineness starting from 40 μm and find their use as a part of various skids and assemblies, such as automated gas distribution skids, startup and instrument gas treatment plants, and booster compressor stations. Dust collectors themselves appear as vertical makes with multicyclone dust catches placed on top with the following operation philosophy:

  • gas flowing through flow swirls (cyclones) around the inner axis of cyclone pipes, while
  • the impact of centrifugal forces has particles and mist separated from gas flowing down to the conical section of dust arresters and settled to rid of all the foreign mixes;
  • gas free of dust and liquids flows via the inner tubing ща cyclones and ends up in the upper vessel to leave the purified.

Reference example for order placement, f.i.: multicon dust arrester DN400, operation pressure Pop=5.5 MPa acc. to Specification TU 3683-042-00153229-2017:

Cyrillic: Пылеуловитель мультициклонный Ду 400, Ру=5,5 МПа ТУ 3683-042-00153229-2017

ENG: Multicon dust arrester DN400 Pop=5.5 MPa. Specification TU 3683-042-00153229-2017

Factor
DN 300
DN 400
DN 700
DN 800
DN 1000
Pressure, MPa
operating
5.5 (7.5)
test
7.1 (9.7)
Fluid
natural gas
Voume, m3
0.1
0.21
0.67
0.929
1.4
Flow, thousand nm3/hr
10…30
20…63
40…125
63…160
60…200

Dimensions, mm

Length

530
870
1075
1070
1815

Width

660
720
970
1200
1270

Height

1710
1955
2375
2390
2405

Available options:

  • other operating pressures, volumes and typical dimensions;
  • other quantities and dimensions of connections;
  • extra instruments and valves;
  • electric heating for dust arrester casing;
  • with or w/o supports;
  • climate design U (up to minus 40°С) and UKhL (up to minus 60°С);
  • extra maintenance platforms;
  • dust arrester casing heat-insulation or
  • corrosion-proofing.