Quick-release end gates/valves are designed for the use in pig and diagnostic tools launchers and receivers, contaminant and dust arresters and manholes in piping, oil processing, petrochemical and oil& gas equipment, along with pipeline ends and dead ends in order to provide quick access to internals of piping and devices and ensure temporary exposure to the atmosphere.
By locking principle, quick-release end gates are made as clamp, bayonet and self-locking (Miaskit) types. All gates come in U and UKhl (Russian area rating) climate designs.
You will find the gate detail example for orders below:
Quick-release end gate, clamp type, horizontal and in right-hand design, for installation on DN1220 piping (units) and sized for P=10.0 MPa, non-seismic-resistant and suitable for operation in moderate and cold macroclimate areas (Russian area rating UKhL):
ЗБКХ-Г-
ENG: ZBKKh-G-P-1220-10,0-SO-UKhL
Spec. TU 28.99.39.190-025-00153229-2017
Quick-release end gate, bayonet type, vertical and in right-hand design, to be installed on DN700 piping (units) and sized for P=6.3 MPa, non-seismic-resistant and suitable for operation in moderate and cold macroclimate areas (Russian area rating UKhL):
ЗБКБ-В-
ENG: ZBKB-G-P-700-6,3-SO-UKhL
Spec. TU 28.99.39.190-025-00153229-2017
Quick-release gate Miaskit type (local make), horizontal and in right-hand design, for installation on DN500 piping (units) and sized for P=16.0 MPa, non-seismic-resistant and suitable for operation in moderate and cold macroclimate areas (Russian area rating UKhL):
ЗБКМ-Г-
ENG: ZBKM-G-P-500-16,0-SO-UKhL
Spec. TU 28.99.39.190-025-00153229-2017
External connection diameter OD, mm |
Operating pressure Pop, not to exceed |
Fluid |
---|---|---|
219 |
4.0, 6.3, 8.0, 10.0, 12.0, 16.0 |
gases and mixtures, oil products, oil and water |
273 |
||
325 |
||
377 |
||
426 |
||
530 |
||
630 |
||
720 |
||
1020 |
||
1220 |
||
1420 |
||
1600 |